My Water Heater Burst – What Do I Do

Keep your burst water heater from causing catastrophic structural damage to your home. Knowing what to do when your water heater bursts will help you quickly clean up the water and prevent severe damage to your home.

alpharettawaterdamageremoval.com gathered information about what to do when your water heater bursts and floods your home.

Water Heater Burst

A burst water heater can be a nightmare. It can cause extensive water damage to your home and belongings if not promptly and properly handled. If you find yourself stepping in floodwater from your burst water heater, here are six steps to prevent extensive water damage and remove the water.

Step 1 – Turn off the water heater’s power supply. The first thing you should do when you discover a burst water heater is to turn off the power supply. If you have an electric water heater, turn off the power at the breaker box. If you have a gas water heater, turn off the gas valve.

Step 2 – Turn off the water supply. Next, turn off the water heater’s water supply. The shut-off valve is typically located near the water heater, on the cold water inlet pipe. Turn the valve clockwise to shut off the water supply.

Tip: If the water supply is left open, water will continue leaking and flooding your home.

Step 3 – Drain the water heater. Once you have turned off the water heater’s power and water supply, drain the water heater. Locate the drain valve (at the bottom of the water heater), attach a garden hose to the valve, and run the hose’s other end to a nearby drain or outside.

Open the valve and allow the water to drain completely. If your water heater is in the basement or lower level, use a sump pump to remove the water.

Step 4 – Remove the floodwater After draining the water heater. It is crucial to remove any standing water. Use a wet/dry vacuum or mop to efficiently remove the water from your home. If the water has flooded the carpet or flooring, use a carpet cleaner or hire a professional to remove the water, dry it, and sanitize the area.

Step 5 – Dry your home. After removing any standing water, it’s essential to completely dry the affected area. Use fans and dehumidifiers to circulate the air and remove any moisture or humidity. If the area is not completely dry, mold and mildew can quickly develop, which can cause or aggravate preexisting health problems.

Step 6 – Call a professional. If you’re not comfortable with or unsure about handling a burst water heater, or if the damage is extensive, call a professional. A plumber can repair or replace the water heater, while a water damage restoration company can handle the water damage and ensure your home is safe and dry.

Note: A burst water heater can quickly cause extensive water damage if not properly handled. If you are unsure of what to do, call a professional.

What Causes a Water Heater to Leak or Burst

A water heater is an essential appliance designed to provide continuous hot water for your home. However, a water heater can leak or malfunction, causing significant damage if it bursts. Understanding common water heater burst causes can help you take steps to prevent them from occurring in your home.

Age – The more common cause of water heater bursts is old age. Over time, the unit’s tank can corrode, weaken, and crack, leading to leaks and, eventually, a burst. Most water heaters have a 10 to 15-year lifespan, highlighting the importance of regularly inspecting your water heater to ensure its good condition.

Sediment Buildup – As the water heats and cools, sediment may build up inside the tank, quickly leading to corrosion, added weight, and an eventual burst. Flushing the tank regularly can help remove sediment buildup and prevent tank damage.

High Water Pressure – High water pressure can strain the water heater tank, causing it to weaken and burst. It’s essential to have a pressure regulator installed in your home to prevent high water pressure from damaging your water heater and other water-based appliances.

Improper Installation – If your water heater was installed improperly, it can put additional stress on the tank and cause it to burst. It’s essential to have your water heater installed by a licensed professional to ensure it’s level and properly connected.

Overheating – If the water heater’s temperature gets too high, it can cause the tank to expand and weaken, leading to a burst. Most water heaters have a temperature and pressure relief valve designed to prevent this, but it’s essential to have the valve checked regularly to ensure it is working properly.

Rust – Rust can severely weaken the tank and cause it to burst. If you notice rust on your water heater, it’s a sign the tank may be corroding on the inside.

Tip: Regular maintenance and inspections can help prevent these issues and ensure your water heater is operating well. If you notice any signs of potential problems, it is crucial to have it inspected and serviced by a licensed professional.

Water Heater Malfunction

In this article, you discovered what immediate actions to take when your water heater malfunctions and floods your home.

When your water heater bursts, your quick response will help you get the water removed and your home cleaned up and prevent extensive water damage.

Your delay in handling a water heater burst can lead to your home suffering severe structural damage, electrical and gas problems, and costly cleanup.

Sources:
doh.wa.gov/emergencies/be-prepared-be-safe/get-ready/water-heaters-how-secure-them
energystar.gov/products/ask-the-experts/when-should-you-replace-your-water-heater
labor.maryland.gov/labor/safety/boilhw.shtml
sandiegocounty.gov/content/sdc/sdhcd/rental-assistance/current-participants/inspections/tp-drain-valves/_jcr_content/par/
centralplumbing.org/water-heater-problems/

Alpharetta Water Damage Restoration

2475 Northwinds Pkwy Ste 200a Alpharetta, GA 30009

(678) 505-0266

The post My Water Heater Burst – What Do I Do appeared first on http://www.alpharettawaterdamageremoval.com

7 Common Causes of Water Damage

Need help keeping your home safe from water damage? Knowing what kind of water damage can happen in your home or building will help you take preventive measures to keep water from causing severe structural damage, ruining your furniture, and causing mold and mildew growth.

alpharettawaterdamageremoval.com gathered information about common causes of water damage in a home and what you can do to prevent it.

What is Water Damage

Water damage is any physical damage caused to property that has come into direct contact with water. It can originate from natural disasters like floods, hurricanes, tornadoes, or torrential downpours. Other causes of water damage can include leaky plumbing, burst pipes, or even a leaking roof. Consider the following water damage causes and how to prevent them:

1. Severe Weather and Natural Disasters

Natural disasters, like floods, hurricanes, and tornadoes, can cause significant water damage to your home (inside and outside). While you cannot prevent natural disasters, you can take proactive steps to minimize the damage. Consider the following preventive measures:

• Keep your gutters and downspouts clean and in good condition
• Install flood sensors and alarms to alert you to potential flooding
• Consider purchasing flood insurance to protect your property

Tip: Flood insurance is offered by the National Flood Insurance Program (NFIP) and is available in participating NFIP communities. Read more at fema.gov/flood-insurance

2. Human Error

Human error, like leaving a faucet running in a basin with poor or stopped drainage, can cause significant water damage to your home. Consider the following measures to prevent human error:

• Educate yourself and your family on the proper use of plumbing fixtures and appliances
• Make sure everyone in your home knows how to turn off the main water supply in case of an emergency
• Consider installing automatic shut-off valves to prevent water damage from human error

Tip: When faucets become challenging to shut off, call a professional plumber to fix the problem or replace the faucet entirely.

3. Leaking or Burst Pipes

One of the more common causes of water damage is burst or leaking pipes (most frequent during frigid winters). This can occur from old age, corrosion, freezing temperatures, or improper installation. Consider the following preventive measures to prevent burst or leaking pipes:

• Schedule regular maintenance and inspections of your plumbing system
• If you notice any signs of leaking or dripping, like discolored walls or ceilings, musty odors, or damp spots, call a professional plumber immediately

Tip: If you live in a region that frequently experiences freezing temperatures, have your plumbing well insulated or equipped with warming strips.

4. Basement Floods

A basement flood can occur due to various factors, like heavy rain, melting snow, or a malfunctioning sump pump. Consider the following to prevent basement flooding:

• Ensure your basement is adequately waterproofed
• Install a sump pump with a backup power source to prevent flooding during power outages
• Ensure your basement windows are sealed and in good condition
• Install “check valves” in sewer traps to prevent flood water backups
• Elevate the furnace, water heater, air conditioner, and other utilities

Tip: Keep your basement well-ventilated and conditioned to prevent moisture buildup and mold or mildew growth.

5. Leaking Roof

Roof leaks commonly cause water damage, especially during heavy rainfall or snowfall. Such leaks can be caused by damaged or missing shingles, clogged gutters, or improper installation. Consider the following to prevent roof leaks:

• Have your roof inspected by a professional roofing contractor regularly
• Keep your gutters clean and clear of debris
• Replace any missing or damaged shingles immediately

Tip: Regular roof inspections should occur in late spring and fall or after severe weather events. Consult your roofer to develop a maintenance program that suits your needs.

6. Water-Based Home Appliances

Water-based appliance malfunctions, like a broken washing machine or dishwasher, can cause significant water damage to your home. Consider the following to prevent appliance malfunctions:

• Schedule regular maintenance and inspection of your appliances
• Check for leaks, cracks, or other signs of wear and tear
• Replace any worn-out hoses or connectors

Tip: Watch for pooling water on your counters or floors. Leaks often begin slowly before erupting into a complete malfunction.

7. HVAC System Malfunctions

HVAC system malfunctions can cause significant water damage to your home. This can occur from clogged drain lines, faulty condensation pumps, or improper installation. To prevent HVAC system malfunctions, consider the following:

• Schedule regular HVAC maintenance and inspection
• Clean or replace your air filters regularly
• Ensure your condensation pump is functioning correctly

Tip: Many air filter manufacturers and HVAC companies strongly recommend changing your air filter every 90 days (3 months).

Water Damage Causes

In this article, you discovered some of the most common causes of water damage and how you can keep them from being so destructive.

Understanding how water damage can happen in your home will help you stay on top of preventive, routine, and seasonal maintenance to prevent it.

Failing to maintain your appliances, roof, HVAC, and other potential sources of water damage can leave you with severe structural damage and costly repair bills.

Sources:
fema.gov/flood-insurance
dnr.wisconsin.gov/emergency/flood.html
energy.gov/energysaver/common-air-conditioner-problems
nationaldisasterrecovery.org/how-can-property-owners-best-respond-to-water-damage-from-plumbing-fixture-and-appliance-failures/

Alpharetta Water Damage Restoration

2475 Northwinds Pkwy Ste 200a Alpharetta, GA 30009

(678) 505-0266

The post 7 Common Causes of Water Damage appeared first on http://www.alpharettawaterdamageremoval.com

7 Signs of Major Plumbing Problems and Solutions

Avoid catastrophic damage and costly cleanup when your home’s plumbing fails. Recognizing when your home’s plumbing is compromised will help prevent plumbing problems from developing into significant water and structural devastation.

alpharettawaterdamageremoval.com gathered information about recognizing when your home’s plumbing is failing and potentially threatening leaks, overflows, and pipe failures and what to do about them.

1. Dirty Water

If your home’s water is coming out of your faucets clouded or colored, it indicates something is going on. Consider the following:

• Cloudy water typically indicates air in the pipes
• Yellow or brown water indicates rust
• A green tint may be caused by extensive corrosion in copper pipes

Water discoloration is a sign to immediately inspect the entire water system; pipes in that state of degradation begin to leak outside the system quickly.

Note: Discolored (yellow or brown) water may reach your home when there is a disruption in older municipal systems, like when the fire department flushes a community’s hydrants or water service is restored after a shutdown.

SOLUTION: Have your water system thoroughly inspected and repaired (if needed).

2. Low Water Pressure

A weak stream or low water pressure indicates a distribution problem. If this only occurs in one faucet, it is likely a clogged faucet aerator and easily fixed.

If you have low water pressure in multiple locations, you are dealing with a much more significant problem which may include the following:

• Clogged or disconnected water main
• Your hot water heater is malfunctioning
• There is an active leak in the supply line

SOLUTION: If the low pressure is caused by the supply line, contact your city’s water department and report the issue. If you suspect the problem is your water main or hot water heater, hire a professional plumbing service to determine the cause and make necessary repairs.

3. Sewer Gas Odor

Traps, drains, and vents are designed to channel sewer gas away from your home. The vents move sewer gas odor to the roof, while drain traps create a “water plug,” creating a barrier to prevent sewer odors from rising through a fixture’s drain. If you can smell sewer gas in your home, that signifies:

• A trap has run dry
• A vent line has cracked

SOLUTION: A dry trap can be fixed by refilling it with water. If this is ineffective, you may need to search the pipes for a leak and repair it. Finding a cracked sewer vent may be more challenging. Vent pipes are typically enclosed in a home’s walls and require drywall removal to find the issue and repair it.

4. Slow Drain

Cleaning out an isolated clog is an easy fix. However, slow drains throughout a home indicate a more significant issue in the main sewer line, like tree roots or a residue buildup.

SOLUTION: Try clearing an isolated clog with a plunger. If plunging the drain fails, snake it from the fixture or the pipes directly below it (these clogs are typically within 5 to 6 feet of the drain). If you determine the clog is in the main sewer line, you can either rent a professional snake from your local home supply or hardware center or contract a plumber to professionally remove the obstruction and repair any damaged portions of the sewer line.

5. Out-of-Control Water Bills

A sudden increase in your water bill is a sign something has gone wrong in your plumbing system. The most common sources of a water bill increase include:

• A running toilet
• A leaky faucet
• An open external spigot
• Filling a pool or jacuzzi
• Irrigation system malfunctions
• Pipe burst
• Water-based appliance malfunctions

Note: One running toilet can quietly waste hundreds of dollars of water. Read more about fixing toilet leaks at alpharettawaterdamageremoval.com/fixing-water-leaks-from-bottom-of-toilet/

SOLUTION: Identify something you may have done to cause the spike in your water bill and monitor the usage during the next billing cycle. Inspect and test your water-based appliances (repair or replace faulty ones). If you cannot locate any obvious reasons for the sudden increase, contact a professional plumber to thoroughly inspect your plumbing and repair the issue.

6. Bubbling or Peeling Paint or Wallpaper

If the paint or wallpaper on a wall or ceiling begins to bubble or peel, it’s a sign there is a leak in your roofing or plumbing system. Once you see paint or wallpaper being water-damaged or brown spots appearing on a ceiling or wall, you must immediately find out what’s wrong.

SOLUTION: You may need your plumber to rule out any leaking pipes or appliances, and if you cannot identify any problems in your plumbing, contact your roofer to investigate the roofing system.

7. Pipe Burst (Frozen Pipes)

If water pressure suddenly drops in the winter, there’s a possibility your pipes have frozen. This is a significant concern and needs to be dealt with immediately (frozen pipes may exceed their pressure limits and crack). The more alarming issue occurs when a cracked pipe thaws and water begins flowing uninhibited, potentially flooding your home.

This problem is more prevalent in homes where supply lines are routed through an attic, garage, crawlspace, or other unheated (or uninsulated) space.

SOLUTION: If you suspect your pipes are frozen or have burst, immediately take the following steps to correct the situation:

• Turn off your water main
• Schedule your plumber for a thorough pipe inspection
• Fix all fissures or cracks
• Insulate all exposed pipes
• Slowly turn on your water main

Tip: You can prevent pipe bursts and freezing by insulating all exposed plumbing and allowing a faucet or two to drip when outside temperatures drop below 32°F.

Plumbing Problems

In this article, you discovered information and solutions to aid in detecting and solving potentially catastrophic plumbing malfunctions.

Identifying plumbing issues early will help you correct them before developing into severe flooding or structural damage.

Failure to recognize and fix plumbing failures can lead to costly cleanup and repair services.

Sources:
epa.gov/watersense/fix-leak-week
news.okstate.edu/articles/agriculture/2021/gedon_water_damage_after_freeze.html
charlottenc.gov/Water/ProtectPipes/Pages/PreventFrozenPipes.aspx
savannahga.gov/2804/High-Water-Bill-Common-Causes

Alpharetta Water Damage Restoration

2475 Northwinds Pkwy Ste 200a Alpharetta, GA 30009

(678) 505-0266

The post 7 Signs of Major Plumbing Problems and Solutions appeared first on http://www.alpharettawaterdamageremoval.com

Floodwater Removal

Avoid costly water damage after a flood in your home. Knowing how to handle, remove, and dry your home after a flood will help you preserve your home’s structural integrity and value.

alpharettawaterdamageremoval.com answers the following questions and offers crucial tips on efficiently removing floodwater from your home and drying out.

What is Floodwater?

Floodwater is defined as water overflowing resulting from a flood or water that overflows from a river, lake, etc., during a flood.

Whether it be rising river water, storm surge, a malfunctioning household appliance, or a clogged sewer line, when water breeches and collects in your home, you are dealing with floodwater.

Why is Floodwater Toxic?

Floodwater may contain high levels of raw sewage or hazardous substances. Symptoms from any level of exposure to contaminated floodwater can begin with an upset stomach, intestinal problems, headache, or other flu-related discomforts. Anyone experiencing these and any other symptoms after floodwater exposure should immediately seek medical attention.

Is it Safe to Play in Floodwater?

No. Stay out of floodwater. Floodwaters can carry many things that may be detrimental to human health. Since you cannot know precisely what is in floodwater at any given time, it is more prudent to keep a safe distance from it.

How Do You Get Rid of Water after a Flood?

One way of removing large volumes of water is to use pumps and/or buckets, followed up with a wet/dry vacuum cleaner to clear up the remainder. You can rent or buy a pump from your local home improvement store.

If the amount of floodwater appears overwhelming, call a professional water damage removal company to help you get things back to normal.

Tip: Before beginning the water removal process, ensure the floodwater’s source has been eliminated or completely stopped.

How Do You Dry Out after a Flood?

Once the bulk of the floodwater has been safely removed from your home, use fans, air blowers, window air conditioners, and dehumidifiers to dry out the structure and air.

Tip: Do not turn on a central air conditioner or heating system (HVAC) if the equipment or ductwork was infiltrated by or submerged in water. This could cause the unit to spread dirt, mold, and other harmful contaminants around your home.

How Long Does It Take for a Flooded House to Dry Out?

When flooding is severe, it can take several weeks or months to completely dry out the structure of a building. One of the most highly recommended actions is to open all windows and doors to create airflow through the building. Thus facilitating the evaporation process.

Will a Dehumidifier Remove Standing Water?

No. A dehumidifier can facilitate dry air, dry floor, and dry walls. While it can remove excessive dampness and aid in drying your home, a dehumidifier cannot drain or remove standing water.

How Long Should I Run a Dehumidifier After a Flood?

While times can vary depending on the extent of the water damage, you will need to run a dehumidifier until the porous surfaces in the space have completely dried. This process can take anywhere from 48 hours to several weeks.

Note: The extent of the water damage and the strength of the dehumidifier are significant factors in the duration of the drying process. Read on for more information about how dehumidifiers work.

Will Water Dry on Its Own?

Typically, excess water in a home will dry up in about a week or two on its own. However, the problem with leaving floodwater alone for that long is the heightened risk of structural damage, mold and mildew growth, along with other health hazards.

How Do You Clean Up Floodwater in a Basement?

As soon as conditions allow, you should clean your basement (or have it professionally cleaned) using a mixture of hot water, heavy-duty cleaner (like chlorine bleach or detergent), and a scrub brush on the walls and flooring. You can kill most of the bacteria and likely prevent any significant mold growth in your basement.

When your basement floods and is damaged, there are more concering matters. In addition to the health risks, hidden damage can cause irreversible, long-term issues to your home. Be mindful of the severity if your foundation or any load-bearing walls have been compromised. If concerned it’s best to have your basement inspected.

Note: The process of removing, repairing, or replacing water-damaged personal items can be intense and expensive, so consider hiring a company to assist in this process.

How Long Does a Concrete Floor Take to Dry After a Flood?

Depending on the extent of the floodwater damage, completely drying a concrete floor may take anywhere from 48 hours to several weeks.

Tip: Well-finished (sealed) concrete or wooden flooring can resist floodwater infiltration and damage significantly longer than flooring without this protection.

Will Homeowners Insurance Cover Flood Damage?

Yes and no. Under the typical home insurance policy, if water damage occurs suddenly or accidentally from a source within your home, like a busted pipe or malfunctioning washing machine, it will likely be covered by your homeowners insurance.

However, If the floodwater comes from outside your home, it will not be covered by your standard homeowners policy. For this type of flooding, you can seek special protection from flood-related damages with a separate flood insurance policy. For more info on homeowners insurance, read this article.

Removing Floodwater

In this article, you discovered Essential questions and answers about floodwater removal and drying out your home.

Taking swift action to remove floodwater from your home, dry it out, and repair water damage will help you maintain a safe and secure home for your loved ones.

Ignoring the urgency to clean up after a flooding event can result in catastrophic structural damages and significant loss in home value.

Sources:
cdc.gov/healthywater/emergency/extreme-weather/floods-standingwater.html
epa.gov/natural-disasters/flooding
osha.gov/sites/default/files/publications/OSHA3471.pdf
fema.gov/sites/default/files/2020-06/Flood_FIMA_Fact_Sheet_advice_salvaging.pdf
nationwide.com/lc/resources/home/articles/does-homeowners-insurance-cover-water-damage

Alpharetta Water Damage Restoration

2475 Northwinds Pkwy Ste 200a Alpharetta, GA 30009

(678) 505-0266

The post Floodwater Removal appeared first on http://www.alpharettawaterdamageremoval.com

How to Increase Water Pressure in Your Shower

Is your low water pressure making it a challenge to take a proper, soothing, and relaxing shower? Knowing how to increase your water pressure will help you take better, more invigorating showers.

alpharettawaterdamageremoval.com gathered information about how to increase your home’s water pressure, significantly improving your shower experience and quality.

What Causes Low Water Pressure in a Shower

Reduced or low water pressure in your shower can result from multiple issues. Consider the following easy-to-fix problems and how they are repaired:

A Clogged Showerhead – Over time, sediment buildup can clog your showerhead, causing significant water pressure loss. Before running to your local home supply retailer to buy a new one or use harsh chemicals on it, try the following solution.

Solution 1: Remove your showerhead and place it in a saucepan full of hot (not boiling) vinegar. Once the sediment buildup has dissolved, remove the showerhead, thoroughly rinse it in cool, clean water, and replace it on the shower arm.

Solution 2: Wrap a vinegar-filled bag around the arm, so the showerhead is completely submerged in the vinegar. Tie the bag to the arm with a rubber band or string so it will remain in place, and leave it there for 24 to 48 hours. Remove the bag and turn on the water.

You Have a Flow Restrictor – Water-efficiency concerns led to widespread flow restrictor use (in the 1970s and 1980s), which reduced the flow rate far below showerhead design levels, often resulting in an unacceptable, low-pressure shower.

Solution: Replace your old showerhead with a more current water-efficient model.

A Worn-Out Diverter Valve – A shower diverter, or a diverter valve, allows you to switch the water stream between different output fixtures. Over time a diverter can wear out, reducing the showerhead’s water flow.

Solution: Replace the diverter with an updated but compatible one (you may have to disassemble the faulty diverter so you can match the size and model at the hardware store).

A Loose Water Temperature Control Valve – A thermostatic shower valve blends hot and cold water to produce the ideal water temperature. If the valve isn’t working properly, your shower water might suddenly go from scorching hot to frigid or may result in reduced water pressure.

Solution: Replace the valve with a new one.

A Leaking Pipe – Leaking pipes can cause severe and abrupt water pressure loss. This issue must be resolved professionally and quickly to prevent severe structural damage.

Solution: Identify the leaking pipe’s location, then shut the water off. You can then expose the leaking pipe and fix it by splicing in a new section of pipe (or patch it with sturdy rubber, held in place with pipe clamps until your plumber can professionally repair it).

A Faulty Water Heater – Your shower’s water pressure can be adversely affected when your hot water heater starts malfunctioning. This problem may occur from an obstructed water supply to the appliance or sediment buildup/obstruction. When this happens, the cold water faucets will remain at full strength while the hot ones will lose their pressure.

Solution: Have your hot water heater professionally evaluated and serviced. Have it replaced if your water heater is severely damaged.

Multiple Taps are Open – Inadvertently leaving a faucet open in the kitchen, for the garden hose, or running a water-based appliance can drastically reduce your shower’s water pressure.

Solution: Shut off water-based appliances and close all other faucets.

Note: If the water pressure has decreased in all of your home’s faucets and water-based appliances, the problem is likely in your home’s water main. Consider the following potential culprits:

• Debris and pollutants from fractures in the water main are obstructing pipes.
• Sediment buildup has slowly clogged your pipes, causing the water pressure to go down, as the water has a narrowed travel space.
• Your home’s main shut-off valve may be partially closed.
• Your home’s pressure-reducing valve (PRV) is faulty.
• There may be a temporary problem with the municipal water supply.

Tip: If you are experiencing low water pressure throughout your home, hire a professional plumber to thoroughly inspect your home’s water main and make any needed repairs. If you determine that the issue is occurring from problems in the municipal water supply, report the problem to your city’s watershed management, water and sewer, or water utilities department.

Low Water Pressure in Your Shower

In this article, you discovered multiple reasons for your shower’s decreased water pressure and what you can do to increase it.

Identifying the source of your shower’s low water pressure will help you resolve the issue, returning your shower to a more soothing and relaxing experience.

Not knowing the cause and fix for your water pressure problem can lead to a frustrating shower and poor hygiene.

Sources:
dallasor.gov/sites/default/files/fileattachments/public_works/page/5706/water_pressure_fact_sheet.pdf
hud.gov/program_offices/public_indian_housing/programs/ph/phecc/strat_w1
flagstaff.az.gov/DocumentCenter/View/42618/DIY_Showerhead-Aerator?bidId=
academia.edu/4044574/10_Minute_Home_Repairs_More_Than_200_Fast_Effective_Fixes_You_Can_Do_Yourself
archfoundation.org/fix-shower-diverter/

Alpharetta Water Damage Restoration

2475 Northwinds Pkwy Ste 200a Alpharetta, GA 30009

(678) 505-0266

The post How to Increase Water Pressure in Your Shower appeared first on http://www.alpharettawaterdamageremoval.com